Recommendations on Excavations
Description
The introduction of the Eurocodes for building control purposes made necessary a revision of the previous edition of the recommendations to comply with the requirements of DIN EN 1997-1:2009 together with the national annex DIN 1997-1/NA:2010-12 and the supplementary regulations of DIN 1054:2010-12. All recommendations were thoroughly checked, revised where necessary and adapted to new knowledge. Chapter 10 "Building excavations in water" was substantially revised. Due to the progress of development of measurement instruments and the more stringent requirements, Chapter 14 "Instrumentation for the monitoring and supervision of building excavation support works" was formulated completely anew.
The recommendations of the working group "Building Excavations" should be of assistance,
- to simplify the design and structural calculation of excavation support works,
- to harmonise loading assumptions and calculation procedures,
- to ensure the structural stability of excavation support works and their individual elements and
- to improve the cost-effectiveness of excavation support works.Mit der Herausgabe der Empfehlungen, die normenähnlichen Charakter haben, unterstützt der Arbeitskreis "Baugruben" der Deutschen Gesellschaft für Geotechnik e.V. (DGGT) die Planungspraxis bei Entwurf und Berechnung von Baugrubenumschließungen.
Zur bauaufsichtlichen Einführung der Eurocodes wurde eine Anpassung der Vorgänger-Auflage der Empfehlungen an die Vorgaben der DIN EN 1997-1:2009-09 in Verbindung mit dem Nationalen Anhang DIN 1997-1/NA:2010-12 und den ergänzenden Regelungen der DIN 1054:2010-12 erforderlich. Alle Empfehlungen wurden gründlich überprüft, soweit erforderlich überarbeitet und an neue Erkenntnisse angepasst. Wesentlich überarbeitet wurde Kapitel 10 "Baugruben im Wasser". Aufgrund der fortgeschrittenen Entwicklung in der Messtechnik und den gestiegenen Anforderungen wurde Kapitel 14 "Messtechnische Überprüfung und Überwachung von Baugrubenkonstruktionen" völlig neu formuliert.
Die Empfehlungen des Arbeitskreises "Baugruben" sollen helfen,
- Entwurf und Berechnung von Baugrubenumschließungen zu erleichtern,
- Lastansätze und Berechnungsverfahren zu vereinheitlichen,
- die Standsicherheit der Baugrubenkonstruktionen und ihrer Einzelteile sicherzustellen und
- die Wirtschaftlichkeit der Baugrubenkonstruktionen zu verbessern.
Introduction
Analysis principles
Magnitude and distribution of earth pressure
General stipulations for analysis
Analysis approaches for soldier pile walls
Analysis approaches for sheet pile walls and in-situ concrete walls
Anchored retaining walls
Excavations with special ground plans
Excavations adjacent to structures
Excavations in water
Excavations in unstable rock mass
Excavations in soft soils
Analysis of the bearing capacity of structural elements
Measurements and monitoring on excavation structures
Appendices
Allgemeines
Grundlagen für die Berechnung
Größe und Verteilung des Erddruckes
Allgemeine Festlegungen für die Berechnung
Berechnungsansätze für Trägerbohlwände
Berechnungsansätze für Spundwände und Ortbetonwände
Verankerte Baugrubenwände
Baugruben mit besonderem Grundriss
Baugruben neben Bauwerken
Baugruben im Wasser
Baugruben in nicht standfestem Gebirge
Baugruben in weichen Böden
Nachweis der Tragfähigkeit der Einzelteile
Messtechnische Überprüfung und Überwachung von Baugrubenkonstruktionen
Anhang
Literatur
Kurzzeichen und Benennungen
The working group 2.4 "Building Excavations" in the technical group "Earthworks and Foundation Engineering" of the German Geotechnics Association, Essen (DGGT), under the leadership of the chairman Prof. Dr.-Ing. A. Hettler, work on a voluntary basis. Der Arbeitskreis 2.4 "Baugruben" in der Fachsektion "Erd- und Grundbau" der Deutschen Gesellschaft für Geotechnik e. V., Essen (DGGT) unter der Leitung des Obmannes Prof. Dr.-Ing. A. Hettler arbeitet auf ehrenamtlicher Basis
With the issue of these recommendations, which have the character of a standard, the „Building Excavations“ working group of the German Geotechnics Association (DGGT) aims to provide assistance with the design and structural calculation of excavation support works.
The introduction of the Eurocodes for building control purposes made necessary a revision of the previous edition of the recommendations to comply with the requirements of DIN EN 1997-1:2009-09 together with the national annex DIN 1997-1/NA:2010-12 and the supplementary regulations of DIN 1054:2010-12. All recommendations were thoroughly checked, revised where necessary and adapted to new knowledge. Chapter 10 „Building excavations in water“ was substantially revised. Due to the progress of development of measurement instruments and the more stringent requirements, Chapter 14 „Instrumentation for the monitoring and supervision of building excavation support works“ was formulated completely anew. The recommendations of the working group „Building Excavations“ should be of assistance,
• to simplify the design and structural calculation of excavation
support works,
• to harmonise loading assumptions and calculation procedures,
• to ensure the structural stability of excavation support works
and their individual elements and
• to improve the cost-effectiveness of excavation support works.
PUBLISHER:
Wiley
ISBN-13:
9783433030363
BINDING:
Hardback
BISAC:
Technology & Engineering
BOOK DIMENSIONS:
Dimensions: 154.90(W) x Dimensions: 215.90(H) x Dimensions: 20.30(D)
AUDIENCE TYPE:
General/Adult
LANGUAGE:
English