{"product_id":"performance-based-building-design-isbn-9783433034392","title":"Performance-Based Building Design","description":"\u003cb\u003ePerformance-Based Building Design\u003c\/b\u003e \u003cp\u003eThis third book in a series of three dealing with building physics and its application, looks to the impact a performance requirements linked approach has on building design and construction. It starts with a resumption of what’s expected from buildings, followed by discussing a range of materials needed to guarantee a correct heat, air, moisture response. Then, looked is to preparing the building site, the excavations needed, the foundations, the below-grade parts and spaces, the structural systems commonly used, the floors, different types of outer walls, different types of roof assemblies, inside walls, the glazing, windows, outer doors, glass façades, bal-conies, all kind of shafts, chimneys, stairs, timber-frame construction, wall, floor and ceiling finishes. Each time again, not only the heat, air, moisture related metrics but also structural integrity, durability, fire safety, acoustics, maintenance, sustainability and buildability are dis- cussed. The whole ends with looking to the risks deficiencies may cause. \u003c\/p\u003e\u003cp\u003eFor this new edition, all chapters have been critically reviewed, actualized and gifted with additional figures where needed, so incorporating the experiences gained from 38 years of teaching to architectural and building engineering students, from 36 years of research, and from 53 years of practice, curing damage cases due to failing performance.Dieses dritte Buch einer dreiteiligen Reihe über Bauphysik und ihre Anwendung befasst sich mit dem Einfluss der Anforderungen nach dem Performance-Konzept auf die Planung und den Bau von Gebäuden. Am Anfang steht die Darstellung der funktionalen Anforderungen an Gebäude, gefolgt von der Erörterung der Materialien, die erforderlich sind, um ein funktionales Wärme- und Feuchteverhalten zu gewährleisten.\u003cbr\u003e Anschließend werden die Vorbereitung der Baustelle, der Aushub, die Fundamente, die unterirdischen Gebäudeteile, übliche Tragstrukturen, Fußbodenaufbauten, Außenwandtypen, verschiedene Dachsysteme, Innenwände, Fenster, Außentüren, Glasfassaden, Balkone, Schächte, Schornsteine, Treppen, Holzrahmenbau, Wand-, Boden- und Deckenabschlüsse erläutert. Dabei werden nicht nur die auf Wärme, Luft und Feuchte bezogenen Messgrößen betrachtet, sondern auch das Tragverhalten, die Dauerhaftigkeit, der Brandschutz, die Akustik, die Instandhaltung, die Nachhaltigkeit und die Baubarkeit diskutiert. Abschließend werden Risiken in den Blick genommen, die durch typische Mängel verursacht werden können.\u003cbr\u003e Das Werk gründet neben der jahrelangen Lehr- und Forschungstätigkeit sowie Gutachter- und Instandsetzungspraxis des Autors auf einer Reihe nationaler und internationaler Literatur, weshalb jedes Kapitel mit einer ausführlichen Liste der berücksichtigten Veröffentlichungen endet.\u003cbr\u003e Gegenüber der 1. Auflage in zwei Bänden wurde der Stoff für mehr Übersichtlichkeit in einem Buch zusammengefasst. Wo sinnvoll und notwendig, wurden Kapitel umgeschichtet, erweitert und umformuliert, so dass ihre Anzahl von 28 auf 20 reduziert werden konnte.\u003cbr\u003e Baugruben und Fundamente bilden jetzt ein gemeinsames Kapitel, während die Anforderungen an Außenwände und Dächer einheitlich betrachtet werden und in acht Kapiteln über die Gebäudehülle, davon fünf über Außenwände und drei über Dachkonstruktionen, zur Auswahl stehen. Es schließen sich die Innenwände und andere spezifische Gebäudeteile an, gefolgt von einem Kapitel über Fenster, Außentüren und Glasfassaden. Die letzten drei Kapitel befassen sich mit dem Holzrahmenbau, dem Innenausbau und der Risikobetrachtung.\u003cbr\u003e Alle Kapitel wurden kritisch durchgesehen, aktualisiert und, wo nötig, mit zusätzlichen Abbildungen versehen, so dass die Erfahrungen aus 38 Jahren Lehrtätigkeit für Architektur- und Bauingenieurstudenten, 36 Jahren Forschung und 53 Jahren Beratungstätigkeit eingeflossen sind.\u003cbr\u003e \u003c\/p\u003e\u003cp\u003ePreface xxi\u003c\/p\u003e \u003cp\u003eAbout the Author xxiii\u003c\/p\u003e \u003cp\u003eList of Units and Symbols xxv\u003c\/p\u003e \u003cp\u003eIntroduction 1\u003c\/p\u003e \u003cp\u003e1 What Does Performance-Based Requirements Mean? 3\u003c\/p\u003e \u003cp\u003e2 Materials for a Correct Hygrothermal Performance 9\u003c\/p\u003e \u003cp\u003e3 Clearing the Building Site, Excavations and Foundations 51\u003c\/p\u003e \u003cp\u003e4 Parts and Spaces Below and on Grade 65\u003c\/p\u003e \u003cp\u003e5 Load-Bearing Structures 103\u003c\/p\u003e \u003cp\u003e6 Floors 113\u003c\/p\u003e \u003cp\u003e7 Outer Walls and Roofs: Performance Checks 139\u003c\/p\u003e \u003cp\u003e8 Massive Outer Walls 149\u003c\/p\u003e \u003cp\u003e9 Massive Outer Walls Insulated Either Inside or Outside 167\u003c\/p\u003e \u003cp\u003e10 Cavity Walls 211\u003c\/p\u003e \u003cp\u003e11 Concrete Panel and Sheet-Metal Outer Walls 251\u003c\/p\u003e \u003cp\u003e12 Outer Walls with Transparent Insulation 265\u003c\/p\u003e \u003cp\u003e13 Low-Slope Roofs 273\u003c\/p\u003e \u003cp\u003e14 Pitched Roofs 321\u003c\/p\u003e \u003cp\u003e15 Sheet-Metal-Covered Roofs 377\u003c\/p\u003e \u003cp\u003e16 Inside Walls, Balconies, Shafts and Staircases 397\u003c\/p\u003e \u003cp\u003e17 Windows, Outer Doors, and Glass Façades 425\u003c\/p\u003e \u003cp\u003e18 Timber Frame Construction 485\u003c\/p\u003e \u003cp\u003e19 Interior Finishes 511\u003c\/p\u003e \u003cp\u003e20 Risk Analysis 527\u003c\/p\u003e \u003cp\u003eIndex 541\u003c\/p\u003e Preface\u003cbr\u003e 0 Introduction\u003cbr\u003e 1 What Means Performance Requirements Based?\u003cbr\u003e In General\u003cbr\u003e Definitions\u003cbr\u003e Advantages\u003cbr\u003e Designing Buildings and Building Parts Performance-Based\u003cbr\u003e Impact\u003cbr\u003e 2 Materials for a Correct Hygrothermal Performance\u003cbr\u003e In General\u003cbr\u003e Materials for Thermal Insulation\u003cbr\u003e Heat Storage Materials\u003cbr\u003e Waterproof Layers\u003cbr\u003e Vapour Barriers and Vapour Retarders\u003cbr\u003e Air Barriers and Air Retarders\u003cbr\u003e Joint Sealants\u003cbr\u003e 3 Clearing the Building Site, Excavations, Foundations\u003cbr\u003e In General\u003cbr\u003e Clearing\u003cbr\u003e Foundations\u003cbr\u003e 4 Parts and Spaces Below and on Grade\u003cbr\u003e In General\u003cbr\u003e Performance Checks\u003cbr\u003e Design and Construction\u003cbr\u003e 5 Load-Bearing Structures\u003cbr\u003e In General\u003cbr\u003e Options\u003cbr\u003e Design Hints\u003cbr\u003e 6 Floors\u003cbr\u003e In General\u003cbr\u003e Assemblies\u003cbr\u003e Performance Checks\u003cbr\u003e Design and Construction\u003cbr\u003e 7 Outer Walls and Roofs: Performance Checks\u003cbr\u003e In General\u003cbr\u003e Outer Walls\u003cbr\u003e Roofs\u003cbr\u003e 8 Massive Outer Walls\u003cbr\u003e Heavy-Weight Masonry\u003cbr\u003e Light-Weight Masonry\u003cbr\u003e 9 Massive Outer Walls Insulated Either In- or Outside\u003cbr\u003e Why?\u003cbr\u003e Inside Insulation\u003cbr\u003e Outside Insulation\u003cbr\u003e 10 Cavity walls\u003cbr\u003e Some History\u003cbr\u003e Performance Checks\u003cbr\u003e Design and Execution\u003cbr\u003e 11 Concrete Panel and Sheet-metal Outer Walls\u003cbr\u003e In General\u003cbr\u003e Concrete Panels\u003cbr\u003e Sheet-Metal Options\u003cbr\u003e 12 Outer Walls with Transparent Insulation\u003cbr\u003e In General\u003cbr\u003e Assemblies\u003cbr\u003e Performance Checks\u003cbr\u003e Application?\u003cbr\u003e 13 Low-Slope Roofs\u003cbr\u003e Some History\u003cbr\u003e Low-Slope Roof Coverings\u003cbr\u003e Compact Low-Slope Roofs\u003cbr\u003e Protected Membrane Roofs\u003cbr\u003e 14 Pitched Roofs\u003cbr\u003e In General\u003cbr\u003e Pitched Roof Coverings\u003cbr\u003e Typology\u003cbr\u003e Assemblies\u003cbr\u003e Performance Checks\u003cbr\u003e Design and Construction\u003cbr\u003e 15 Sheet-metal Covered Roofs\u003cbr\u003e In General\u003cbr\u003e Sheet-Metal Coverings\u003cbr\u003e Sheet-Metal Roof Typology\u003cbr\u003e Performance Checks\u003cbr\u003e Design and Construction\u003cbr\u003e 16 Inside Walls, Balconies, Shafts, and Staircases\u003cbr\u003e In General\u003cbr\u003e Inside Party Walls\u003cbr\u003e Inside Partition Walls\u003cbr\u003e Balconies\u003cbr\u003e Shafts\u003cbr\u003e Stairs\u003cbr\u003e 17 Windows, Outer Doors, and Glass Facades\u003cbr\u003e In General\u003cbr\u003e Glazing\u003cbr\u003e Windowns and Outer Doors\u003cbr\u003e Glass Facades\u003cbr\u003e 18 Timber-framed Construction\u003cbr\u003e Some History\u003cbr\u003e Construction, Assemblies\u003cbr\u003e Performance Checks\u003cbr\u003e Design and Construction\u003cbr\u003e 19 Interior Finishes\u003cbr\u003e In General\u003cbr\u003e Building Services\u003cbr\u003e On Walls\u003cbr\u003e On floors\u003cbr\u003e Of Ceilings\u003cbr\u003e Carpentry\u003cbr\u003e 20 Risk Analysis\u003cbr\u003e Of Help?\u003cbr\u003e Definitions\u003cbr\u003e How to Perform\u003cbr\u003e Cavity Walls as Example\u003cbr\u003e  \u003cp\u003e\u003cb\u003eDr. Ir. Hugo S.L.C. Hens\u003c\/b\u003e is an emeritus professor of the University of Leuven (KULeuven), Belgium. Until 1972, he worked as a structural engineer and site supervisor at a mid-sized architectural office. He taught building physics from 1975 to 2003, performance-based building design from 1975 to 2005 and building services from 1975 to 1977 and 1990 to 2008. He authored and co-authored 68 peer reviewed journal papers and 174 conference papers about the research done, has helped to manage hundreds of building damage cases and acted as co-ordinator of the CIB W40 working group on Heat and Mass Transfer in Buildings from 1983 to 1993. Between 1986 and 2008, he was operating agent of the Annexes 14, 24, 32 and 41 of the IEA EXCO on Energy in Buildings and Communities. He is a fellow of the American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE).  Dr. Ir. Hugo S.L.C. Hens ist emeritierter Professor der Universität Leuven (KU Leuven), Belgien. Bis 1972 arbeitete er als Tragwerkplaner und Bauleiter in einem mittelgroßen Architekturbüro. Nach dem plötzlichen Tod seines Vorgängers und Förderers Professor A. de Grave und nach der Verteidigung seiner Doktorarbeit baute er ab 1975 schrittweise das Fachgebiet Bauphysik am Fachbereich Bauingenieurwesen auf. Er lehrte Bauphysik von 1975 bis 2003, Performance Based Building Design von 1975 bis 2005 und Gebäudetechnik von 1975 bis 1977 und von 1990 bis 2008. Hugo Hens war Autor und Mitautor von 68 begutachteten Zeitschriftenaufsätzen und 174 Konferenzbeiträgen über seine Forschungsarbeiten, und erstellte Hunderte von Schadensgutachten und Sanierungsplanungen. Von 1983 bis 1993 wirkte er als Koordinator der CIB W40 Working group für \"Heat and Mass Transfer in Buildings\". Zwischen 1986 und 2008 war er Beauftragter für die Anhänge 14, 24, 32 und 41 der IEA EXCO on Energy in Buildings and Communities. Er ist Mitglied der American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE).  \u003c\/p\u003e\u003cp\u003eThis third book in a series of three dealing with building physics and its application, looks to the impact a performance requirements linked approach has on building design and construction. It starts with a resumption of what’s expected from buildings, followed by discussing a range of materials needed to guarantee a correct heat, air, moisture response. Then, looked is to preparing the building site, the excavations needed, the foundations, the below-grade parts and spaces, the structural systems commonly used, the floors, different types of outer walls, different types of roof assemblies, inside walls, the glazing, windows, outer doors, glass façades, balconies, all kind of shafts, chimneys, stairs, timber-frame construction, wall, floor and ceiling finishes. Each time again, not only the heat, air, moisture related metrics but also structural integrity, durability, fire safety, acoustics, maintenance, sustainability and buildability are discussed. The whole ends with looking to the risks deficiencies may cause. \u003c\/p\u003e\u003cp\u003eFor this new edition, all chapters have been critically reviewed, actualized and gifted with additional figures where needed, so incorporating the experiences gained from 38 years of teaching to architectural and building engineering students, from 36 years of research, and from 53 years of practice, curing damage cases due to failing performance.\u003c\/p\u003e","brand":"Ernst \u0026 Sohn","offers":[{"title":"Default Title","offer_id":47989764554981,"sku":"NP9783433034392","price":105.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1842\/7735\/files\/9783433034392.jpg?v=1761785389","url":"https:\/\/k12savings.com\/es\/products\/performance-based-building-design-isbn-9783433034392","provider":"K12savings","version":"1.0","type":"link"}