{"product_id":"ceramic-membranes-for-separation-and-reaction-isbn-9780470014400","title":"Ceramic Membranes for Separation and Reaction","description":"\u003ci\u003eCeramic Membranes for Reaction and Separation\u003c\/i\u003e is the first single-authored guide to the developing area of ceramic membranes.  \u003cp\u003eStarting by documenting established procedures of ceramic membrane preparation and characterization, this title then focuses on gas separation. The final chapter covers ceramic membrane reactors;- as distributors and separators, and general engineering considerations.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eChapters include key examples to illustrate membrane synthesis, characterisation and applications in industry.\u003c\/li\u003e \u003cli\u003eTheoretical principles, advantages and disadvantages of using ceramic membranes under the various conditions are discussed where applicable.\u003c\/li\u003e \u003c\/ul\u003e  Chapter 1.  \u003cp\u003eCeramic Membranes and Membrane Processes.\u003c\/p\u003e \u003cp\u003e1.1 Introduction.\u003c\/p\u003e \u003cp\u003e1.2 Membrane Processes.\u003c\/p\u003e \u003cp\u003e1.2.1 Gas separation.\u003c\/p\u003e \u003cp\u003e1.2.2 Pervaporation.\u003c\/p\u003e \u003cp\u003e1.2.3 Reverse osmosis and nanofiltration.\u003c\/p\u003e \u003cp\u003e1.2.4 Ultrafiltration and microfiltration.\u003c\/p\u003e \u003cp\u003e1.2.5. Dialysis.\u003c\/p\u003e \u003cp\u003e1.2.6 Electrodialysis.\u003c\/p\u003e \u003cp\u003e1.2.7 Membrane contactor.\u003c\/p\u003e \u003cp\u003e1.2.8 Membrane reactors.\u003c\/p\u003e \u003cp\u003eReferences.\u003c\/p\u003e \u003cp\u003eChapter 2.\u003c\/p\u003e \u003cp\u003ePreparation of Ceramic Membranes.\u003c\/p\u003e \u003cp\u003e2.1 Introduction.\u003c\/p\u003e \u003cp\u003e2.2 Slip casting.\u003c\/p\u003e \u003cp\u003e2.3 Tape casting.\u003c\/p\u003e \u003cp\u003e2.4 Pressing.\u003c\/p\u003e \u003cp\u003e2.5 Extrusion.\u003c\/p\u003e \u003cp\u003e2.6 Sol-gel process.\u003c\/p\u003e \u003cp\u003e2.7 Dip-coating.\u003c\/p\u003e \u003cp\u003e2.8 Chemical vapour deposition (CVD).\u003c\/p\u003e \u003cp\u003e2.9 Preparation of hollow fibre ceramic membranes.\u003c\/p\u003e \u003cp\u003e2.9.1 Preparation of spinning suspension.\u003c\/p\u003e \u003cp\u003e2.9.2 Spinning of ceramic hollow fibre precursors.\u003c\/p\u003e \u003cp\u003e2.9.3  Sintering.\u003c\/p\u003e \u003cp\u003e2.9.4 Example 1: Preparation of porous Al\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e hollow fibre membranes.\u003c\/p\u003e \u003cp\u003e2.9.5 Example 2: Preparation of TiO\u003csub\u003e2\u003c\/sub\u003e\/Al\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e composite hollow fibre membranes.\u003c\/p\u003e \u003cp\u003e2.9.6 Example 3: Preparation of dense perovskite hollow fibre membranes.\u003c\/p\u003e \u003cp\u003eAppendix 2.1: Surface forces.\u003c\/p\u003e \u003cp\u003eReferences.\u003c\/p\u003e \u003cp\u003eChapter 3.\u003c\/p\u003e \u003cp\u003eCharacterisation of Ceramic Membranes.\u003c\/p\u003e \u003cp\u003e3.1 Introduction.\u003c\/p\u003e \u003cp\u003e3.2 Morphology of membrane surfaces and cross sections.\u003c\/p\u003e \u003cp\u003e3.3 Porous ceramic membranes.\u003c\/p\u003e \u003cp\u003e3.3.1 Gas adsorption\/desorption isotherms.\u003c\/p\u003e \u003cp\u003e3.3.2 Permporometry.\u003c\/p\u003e \u003cp\u003e3.3.3 Mercury porosimetry.\u003c\/p\u003e \u003cp\u003e3.3.4 Thermoporometry.\u003c\/p\u003e \u003cp\u003e3.3.5 Liquid displacement techniques.\u003c\/p\u003e \u003cp\u003e(a) Bubble point method.\u003c\/p\u003e \u003cp\u003e(b) Liquid displacement method.\u003c\/p\u003e \u003cp\u003e3.3.6 Permeation method.\u003c\/p\u003e \u003cp\u003e(a) Liquid permeation.\u003c\/p\u003e \u003cp\u003e(b) Gas permeation.\u003c\/p\u003e \u003cp\u003e3.3.7 Measurements of solute rejection.\u003c\/p\u003e \u003cp\u003e3.4 Dense ceramic membranes.\u003c\/p\u003e \u003cp\u003e3.4.1 Leakage test.\u003c\/p\u003e \u003cp\u003e3.4.2 Permeation measurements.\u003c\/p\u003e \u003cp\u003e3.4.3 XRD.\u003c\/p\u003e \u003cp\u003e3.4.4 Mechanical strength.\u003c\/p\u003e \u003cp\u003eNotation.\u003c\/p\u003e \u003cp\u003eReferences.\u003c\/p\u003e \u003cp\u003eChapter 4.\u003c\/p\u003e \u003cp\u003eTransport and Separation of Gases in Porous Ceramic Membranes.\u003c\/p\u003e \u003cp\u003e4.1 Introduction.\u003c\/p\u003e \u003cp\u003e4.2 Performance indicators of gas separation membranes.\u003c\/p\u003e \u003cp\u003e4.3 Ceramic membranes for gas separation.\u003c\/p\u003e \u003cp\u003e4.4 Transport Mechanisms.\u003c\/p\u003e \u003cp\u003e4.4.1 Knudsen and slip flow.\u003c\/p\u003e \u003cp\u003e4.4.2 Viscous flow.\u003c\/p\u003e \u003cp\u003e4.4.3 Surface flow.\u003c\/p\u003e \u003cp\u003e4.4.4 Capillary condensation.\u003c\/p\u003e \u003cp\u003e4.4.5 Configurational or micropore diffusion.\u003c\/p\u003e \u003cp\u003e4.4.6 Simultaneous occurrence of different mechanism.\u003c\/p\u003e \u003cp\u003e4.5 Modification of porous ceramic membranes for gas separation.\u003c\/p\u003e \u003cp\u003e4.6 Resistance model for gas transport in composite membranes.\u003c\/p\u003e \u003cp\u003e4.6.1 Effect of support layers.\u003c\/p\u003e \u003cp\u003e4.6.2 Effect of non-zeolitic pores.\u003c\/p\u003e \u003cp\u003e4.6.3 Effect of coating.\u003c\/p\u003e \u003cp\u003e4.7 System design.\u003c\/p\u003e \u003cp\u003e4.7.1 Operating Schemes.\u003c\/p\u003e \u003cp\u003e(a) Perfect mixing.\u003c\/p\u003e \u003cp\u003e(b) Cross flow.\u003c\/p\u003e \u003cp\u003e(c ) Parallel plug flow.\u003c\/p\u003e \u003cp\u003e4.7.2 Design equations for membrane processes in gas separation.\u003c\/p\u003e \u003cp\u003e(a) Perfect mixing.\u003c\/p\u003e \u003cp\u003e(b) Cross flow.\u003c\/p\u003e \u003cp\u003e(c) Cocurrent flow.\u003c\/p\u003e \u003cp\u003e(d) Countercurrent flow.\u003c\/p\u003e \u003cp\u003eNotation.\u003c\/p\u003e \u003cp\u003eReferences.\u003c\/p\u003e \u003cp\u003eChapter 5.\u003c\/p\u003e \u003cp\u003eCeramic Hollow Fibre Membrane Contactors for Treatment of Gases\/Vapours.\u003c\/p\u003e \u003cp\u003e5.1 Introduction.\u003c\/p\u003e \u003cp\u003e5.2 General review.\u003c\/p\u003e \u003cp\u003e5.3 Operating modes and mass transfer coefficients.\u003c\/p\u003e \u003cp\u003e5.3.1 Nonwetted mode.\u003c\/p\u003e \u003cp\u003e5.3.2 Wetted mode.\u003c\/p\u003e \u003cp\u003e5.3.3 Mass transfer coefficients determined from experiments.\u003c\/p\u003e \u003cp\u003e5.4 Mass transfer in hollow fibre contactors.\u003c\/p\u003e \u003cp\u003e5.4.1 Mass transfer in hollow fibre lumen.\u003c\/p\u003e \u003cp\u003e5.4.2 Mass transfer across membrane.\u003c\/p\u003e \u003cp\u003e5.4.3 Mass transfer in shell side of a contactor.\u003c\/p\u003e \u003cp\u003e5.4.4 Nonwetted, wetted, and partially wetted conditions in a hollow fibre contactor.\u003c\/p\u003e \u003cp\u003e5.5 Effect of chemical reaction.\u003c\/p\u003e \u003cp\u003e5.5.1 Instantaneous reaction.\u003c\/p\u003e \u003cp\u003e5.5.2 Fast reaction.\u003c\/p\u003e \u003cp\u003e5.6 Design equations.\u003c\/p\u003e \u003cp\u003eNotation.\u003c\/p\u003e \u003cp\u003eReferences.\u003c\/p\u003e \u003cp\u003eAppendix A.\u003c\/p\u003e \u003cp\u003eChapter 6.\u003c\/p\u003e \u003cp\u003eMixed Conducting Ceramic Membranes for Oxygen Separation\u003cb\u003e.\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003e6.1 Introduction.\u003c\/p\u003e \u003cp\u003e6.2 Fundamentals of mixed conducting ceramic materials.\u003c\/p\u003e \u003cp\u003e6.2.1 Structure of peroviskite-type of materials.\u003c\/p\u003e \u003cp\u003e6.2.2 Doping strategies.\u003c\/p\u003e \u003cp\u003e6.2.3 Properties of materials.\u003c\/p\u003e \u003cp\u003e6.3 Current status in oxygen permeable membranes.\u003c\/p\u003e \u003cp\u003e6.3.1 Pervoskite-type oxides.\u003c\/p\u003e \u003cp\u003eSr(Co,Fe)O\u003csub\u003e3-d\u003c\/sub\u003e (SCFO).\u003c\/p\u003e \u003cp\u003eLa(Co,Fe)O\u003csub\u003e3-d\u003c\/sub\u003e (LCFO).\u003c\/p\u003e \u003cp\u003eLaGaO3(LGO).\u003c\/p\u003e \u003cp\u003e6.3.2 Non-perovskite-type oxides.\u003c\/p\u003e \u003cp\u003e6.3.3 Summary of ceramic oxygen permeable materials.\u003c\/p\u003e \u003cp\u003e6.4 Dual phase membranes.\u003c\/p\u003e \u003cp\u003e6.5 Oxygen transport.\u003c\/p\u003e \u003cp\u003e6.5.1 Transport mechanism.\u003c\/p\u003e \u003cp\u003e6.5.2 Transport equations.\u003c\/p\u003e \u003cp\u003e6.5.3 Transport analysis.\u003c\/p\u003e \u003cp\u003e6.6 Air separation.\u003c\/p\u003e \u003cp\u003e6.6.1 Design equations.\u003c\/p\u003e \u003cp\u003eCocurrent flow.\u003c\/p\u003e \u003cp\u003eCountercurrent flow.\u003c\/p\u003e \u003cp\u003e6.6.2 Performance analysis.\u003c\/p\u003e \u003cp\u003eEffect of operating pressures and temperatures.\u003c\/p\u003e \u003cp\u003eEffect of flow patterns.\u003c\/p\u003e \u003cp\u003eEffect of feed flow rate.\u003c\/p\u003e \u003cp\u003eEffect of membrane area.\u003c\/p\u003e \u003cp\u003eComparison with experimental data.\u003c\/p\u003e \u003cp\u003eProduction of oxygen using hollow fibre modules.\u003c\/p\u003e \u003cp\u003e6.7 Further development-challenges and prospects.\u003c\/p\u003e \u003cp\u003eNotation.\u003c\/p\u003e \u003cp\u003eReferences.\u003c\/p\u003e \u003cp\u003eChapter 7.\u003c\/p\u003e \u003cp\u003eMixed Conducting Ceramic Membranes for Hydrogen Permeation.\u003c\/p\u003e \u003cp\u003e7.1 Introduction.\u003c\/p\u003e \u003cp\u003e7.2 Proton and electron (hole) conducting materials and membranes.\u003c\/p\u003e \u003cp\u003e7.2.1 Pervoskite-type oxides.\u003c\/p\u003e \u003cp\u003e7.2.2 Non-pervoskite-type oxides.\u003c\/p\u003e \u003cp\u003e7.3 Dual phase membranes.\u003c\/p\u003e \u003cp\u003e7.4 Proton transport.\u003c\/p\u003e \u003cp\u003e7.4.1 Transport mechanism.\u003c\/p\u003e \u003cp\u003e7.4.2 Transport equations for mixed proton-hole conducting membranes.\u003c\/p\u003e \u003cp\u003e7.4.3 Transport analysis.\u003c\/p\u003e \u003cp\u003eEffect of membrane thickness.\u003c\/p\u003e \u003cp\u003eEffect of temperature.\u003c\/p\u003e \u003cp\u003eEffect of partial pressure of oxygen.\u003c\/p\u003e \u003cp\u003eComparison with experimental data.\u003c\/p\u003e \u003cp\u003e7.5 Applications of proton conducting ceramic membranes.\u003c\/p\u003e \u003cp\u003e7.5.1 Hydrogen production.\u003c\/p\u003e \u003cp\u003e7.5.2 Dehydrogenation reactions.\u003c\/p\u003e \u003cp\u003eNotation.\u003c\/p\u003e \u003cp\u003eReferences.\u003c\/p\u003e \u003cp\u003eChapter 8.\u003c\/p\u003e \u003cp\u003eCeramic Membrane Reactors.\u003c\/p\u003e \u003cp\u003e8.1 Introduction.\u003c\/p\u003e \u003cp\u003e8.2 Membranes as product separators.\u003c\/p\u003e \u003cp\u003e8.2.1 Microporous membrane reactors.\u003c\/p\u003e \u003cp\u003e8.2.2 Dense ceramic membrane reactors.\u003c\/p\u003e \u003cp\u003e8.2.2.1 Experimental investigation of a dense ceramic membrane reactor for methane coupling reaction.\u003c\/p\u003e \u003cp\u003e8.3 Membranes as a reactant distributor.\u003c\/p\u003e \u003cp\u003e8.3.1 Porous membrane reactors.\u003c\/p\u003e \u003cp\u003e8.3.1.1 Techniques in modification of membrane pores.\u003c\/p\u003e \u003cp\u003e8.3.1.2 Applications of porous ceramic membrane reactors.\u003c\/p\u003e \u003cp\u003e8.3.1.3 Analysis of membrane reactors for elimination of DO from water.\u003c\/p\u003e \u003cp\u003e8.3.2 Dense ceramic membranes.\u003c\/p\u003e \u003cp\u003e8.3.2.1 Configurations of the dense ceramic membrane reactors.\u003c\/p\u003e \u003cp\u003e8.3.2.2 Applications of the dense ceramic membrane reactors.\u003c\/p\u003e \u003cp\u003e8.3.2.3 Experimental investigation of a dense membrane reactor for oxidative methane coupling (OMC).\u003c\/p\u003e \u003cp\u003eNotation.\u003c\/p\u003e \u003cp\u003eReferences.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eKang Li\u003c\/strong\u003e is Professor of Chemical Engineering at Imperial College London. His present research interests are in the preparation and characterisation of polymeric and inorganic hollow fibre membranes, fluid separations using membranes, and membrane reactors for energy application and CO2 capture. Kang Li currently leads a research group at Imperial of 2 MSc students, 8 PhD students and 3 post-doctorial research fellows. He has published over 180 research papers in international referred journals, holds five patents, and is the author of a book in the area of ceramic membranes - Ceramic Membranes for Separation and Reaction, John Wiley, 2007 -.   Ceramic membranes have been developed for similar process applications to polymeric membranes applications, including ultrafiltration, desalination, gas separation, pervaporation, and biochemical reactions. They are used especially where high alkaline (or acid) feed solution or high temperature operation precludes the use of existing polymeric membranes. In general, a ceramic membrane can be described as a permselective barrier or a fine sieve. Ceramic membranes are usually composite ones consisting of several layers of one or more different ceramic materials. They generally have a macroporous support, one or two mesoporous intermediate layers and a microporous (or a dense) top layer. The bottom layer provides mechanical support, while the middle layers bridge the pore size differences between the support layer and the top layer where the actual separation takes place. Commonly used materials for ceramic membranes are Al2O3, TiO2, ZrO2 and SiO2 or a combination of these materials.\u003cbr\u003e This book is a single-authored guide to the developing area of ceramic membranes. It starts by documenting established procedures of ceramic membrane preparation and characterization. The book then focuses on gas separation, the processes involved with the transport and separation of gases in porous ceramic membranes, ceramic membrane modules for gas treatments, the transport of oxygen and hydrogen in dense ceramic membranes, and ceramic hollow fiber membranes for oxygen enrichment. The final chapter covers ceramic membrane reactors. Chapters provide key examples to illustrate membrane synthesis, characterization and applications in industry. The theoretical principles, advantages and disadvantages of using ceramic membranes under the various conditions are discussed where applicable.\u003cbr\u003e The book is aimed at industrial and academic researchers and process developers working on membrane technology and development. Industries for which this book is applicable include: pharmaceutical, food and beverage, biomedical applications (tissue development), waste and wastewater treatment, petrochemicals and energy conversion. It is also relevant to upper-level undergraduates and Masters students taking modules on membrane science, as well as PhD candidates within departments of chemical and process development who would use this book as a source of reference.\u003cbr\u003e\u003c\/p\u003e","brand":"Wiley","offers":[{"title":"Default Title","offer_id":47988898496741,"sku":"NP9780470014400","price":216.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1842\/7735\/files\/9780470014400.jpg?v=1761781970","url":"https:\/\/k12savings.com\/es\/products\/ceramic-membranes-for-separation-and-reaction-isbn-9780470014400","provider":"K12savings","version":"1.0","type":"link"}